The camera control unit AK-HCU200E allows a high-quality, long-distance optical fibre transmission camera system to be configured at low cost. The optical fibre transmission is supporting uncompressed video signals over a distance of approximately 1.000 m between the camera and camera control unit. The compact, lightweight unit measures 2U in height and is rack-mountable. Additionally the AK-HCU200E has a built-in cross converter supporting 720p/59,94 and 720p/50.
There are currently no key services available.
There are currently no other services available.
|Power Supply||100 V to 240 V AC, 50Hz/60 Hz|
|Power Consumption||170 W (Without CAMERA connected: 32 W)|
|Capacity for Supplying Power to a Camera||190 V DC, 0.6 A|
|Operating Temperature||0 °C to 40 °C (32 °F to 104 °F)|
|Operating Humidity||10 % to 90 % (no condensation)|
|Weight||Approx. 6.6 kg (approx. 14.6 lb)|
|Dimensions (W x H x D)||424 mm x 88 mm x 400 mm (16-11/16 inches x 3-7/16 inches x 15-3/4 inches) Excluding protrusions|
|Video Output||HD-SDI/SD-SDI: 4 lines (2 lines shared with picture monitor output*1) Analog composite: 1 line (1 line shared with picture monitor output*1)|
|Output Format||1080/59.94i, 1080/50i, 1080/29.97PsF*2, 1080/25PsF*2, 1080/23.98PsF*2, 720/59.94p, 720/50p|
|Return Input||HD-SDI/SD-SDI: 2 lines (switched depending on the setting) VBS: 1 line|
|Prompter Input||1 line, Analog composite|
|Reference Input||1 line (1 loop-through line) Black burst/tri-level*3|
|Microphone Output||2 lines (XLR, 3-pin, male), 0 dBm/600 Ω|
|Intercom||XLR, 5-pin, female Input: –55 dBu to –10 dBu Output: 100 mW (max.)|
|Communication||Intercom input/output: 2 lines (1/2*1) (0 dBm, 600 Ω, RTS/4W*1) PGM: 1 line, input (0 dBm/600 Ω) Tally input: Red, Green, 1 input each|
|ROP Interface||RS-422, 1 line, 12 V output|
|MSU Interface||RS-422, 1 line, GPI for control|
|LAN Port||1 line (8-pin, RJ45)|
|Note||*1: Depending on the setting, only one of them can be selected at one time. *2: The 1080/29.97PsF, 1080/25PsF and 1080/23.98PsF formats must be selected at the camera. *3: The black burst signal and tri-level sync signal of the reference input are recognized automatically.|